Precast Concrete Shuttering Magnet Spherical Head Anchor Lifting Anchor

Product Description

Lifting Anchor Introduction
Lifting Anchor is hot forged from Manganese steel. The former head provides spherical seating that the Lifting Eye engages, while a disc-shaped foot is embedded in the concrete. Due to its being a forged part, the Swift Lift Foot Anchor does not depend on welds or thread engagement to develop its safe working load. Forging provides maximum safety with its advantageous material structure. This allows the anchor to easily meet the OSHA requirement of a 4 to 1 factor of safety.
Lifting Anchors, Clutches and accessories make lifting concrete components easy, efficient, and safer during transportation, rigging, and lifting of precast concrete elements.
The Lifting Anchors system utilizes a fully engineered approach combining cast-in lifting anchors, recess formers, and custom-fitting lifting clutches. Using the Lifting Anchors system results in fewer failures, saving time and costs due to damage or construction delays.
Lifting Anchor is the most versatile and widely used anchor in the Lifting Anchor range. Available in a wide range of Working Load Limits (WLL), all Lifting Anchor comply with AS 3850.1:2015. Consistent with the Reid commitment to local testing, Lifting Anchor has been extensively tested in concrete comprising of over 500 individual tests and consuming approximately 150 tons of concrete. 
The anchor may only be used in combination with the mentioned GME lifting devices.
Spherical head anchors are designed for the transport of precast concrete units only. Multiple-use within the transport chain(from production to installation of the unit) means no repeated usage. This Installation and Application Instruction does not specify a repeated usage (e.g.-ballasts for cranes) or a permanent fixation.

Past Product List
Lifting Anchor

Code	Load group	L	D	D1	D2	S	R	Ar
	T	mm	mm	mm	mm	mm	mm	mm
GMELA1.3-120	1.3	120	10	19	25	10	30	390
GMELA1.3-240	1.3	120	10	19	25	10	30	390
GMELA2-140	2	140	14	26	35	11	37	450
GMELA2-190	2	190	14	26	35	11	37	450
GMELA2-280	2	280	14	26	35	11	37	450
GMELA2.5-170	2.5	170	14	26	35	11	37	540
GMELA2.5-280	2.5	280	14	26	35	11	37	540
GMELA4-210	4	210	18	36	45	15	47	675
GMELA4-240	4	240	18	36	45	15	47	675
GMELA4-340	4	340	18	36	45	15	47	675
GMELA4-420	4	420	18	36	45	15	47	675
GMELA5-240	5	240	20	36	45	15	47	765
GMELA5-340	5	340	20	36	45	15	47	765
GMELA5-480	5	480	20	36	45	15	47	765
GMELA7.5-300	7.5	300	24	46	60	15	59	945
GMELA7.5-540	7.5	540	24	46	60	15	59	945
GMELA7.5-680	7.5	680	24	46	60	15	59	945
GMELA10-340	10	340	28	46	70	15	59	1100
GMELA10-680	10	680	28	46	70	15	59	1100
GMELA15-400	15	400	34	69	98	15	80	1250
GMELA20-500	20	500	38	69	98	15	80	1550
GMELA20-1000	20	1000	38	69	98	15	80	1550
GMELA32-700	32	700	50	88	135	23	107	2150
GMELA32-1200	32	1200	50	88	135	23	107	2150

Safety Factor is 3:1. Other different Lengths and load capacity are available upon request.

Stainless Steel 304 (A2) / 316 (A4) / 20Mn2A are available upon request
Specification: 1.3T, 2.5T, 4T, 5T, 7.5T, 10T, 15T, 20T, 32T
Surface: Original Color. Zinc Plating. Hot Dip Galvanized

Application Picture

Lifting Anchor Primary Competitive Advantages
1. More than 10 years 4 years of focus on building material manufacturing
2. GME's products are enhanced by the factory QA and quality control checks during the production, if necessary, each order can be sent out with a certificate referring back to test
3. OEM/ODOM capability: more than 10 years' experience
Easy installation due to the rotational symmetry optimized for automated anchor feeding.
5. Quick coupling of the lifting device into the anchor.
6. Robust, long-lasting lifting device.

Market
GME's business scope covers Australia, Canada, the United States, Thailand, and other countries. With the continuous expansion of our customer base and production capacity. GME can provide project design and manufacturing services to customers 12 hours a day.


Quality Management System
In May 2014, our factory has passed Quality Management System TS16949 and in October, our factory passed ISO14001, ISO9001, and GB/28001.
Our factory performs process management based on customer orientation emphasizes process control, quality cost management, and reduces waste. We also use the Advantaged Product Quality Planning (PAPP), Potential Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPEC) Production Part Approval Process (PPAP), Measurement System Analysis (MAS) Error Proofing method to prevent the defects from being happened.


5R Management Material Procurement System
Our purchasing manager has more than 7-year purchasing experience and rich in experience quality control and the advantages of different factories and different products, and different quality levels.
Spherical Head T Anchor Testing Report:



Production Equipment and Process
What sets us apart from our competitors is our ideal magnetic solution, excellent quality, and great service.
With a testing laboratory equipped with state-of-the-art measuring and testing devices, our QC dept. ensures ongoing development and maintenance of high-quality standards and guarantees full compliance with customer requirements and all applicable regulations.
(production equipment and process as below)

From the production of parts to the final product, the requires steps. (The specific production process depends on different equipment capabilities)
To assure the quality, we would conduct a strict quality check in accordance with the industry standard. A special quality inspector is responsible for inspecting each process.

Past Project
Our company is about to be established for 20 years. During these two decades, we have the footprint of our products on all continents. In this fast innovation and development-oriented industry, we rely on solid product quality and strive to open up a path that belongs to us.Production Workshop

Comprehensive Labs

Relative Project (with)
In September 2019, GME participate in the Thailand precast concrete exhibition and successfully concluded the exhibition. 

After the exhibition, we went to the customer's factory to learn and provide solutions for customers.

Response & Production
Reply within 12H
The professional team can respond to your inquiry or question within 12H after receiving the inquiry.
Case Analysis
A professional technical and sales team will work on your project.
Customized Solution
After the discussion, we will give a satisfied & tailor-made solution.
Quote
once the solution is accepted, we will provide our best rate.
Order
When a quote is accepted, you can place formal order.
Production
when our FD receives the transfer copy or payment, our factory will start production asap
After-Sales
Quality Feedback Collection
collect quality feedback from our customers to keep ourselves informed of our product quality.
Goods Arrival Notice
track the goods, let customers know when the goods are about to arrive.
Shipping Notice
Once we send out our goods, we will send the tracking number, pictures, and requirements to our clients
Operation Guide
When customers meet problems and need instruction, we will be there.
Regular Visit
Regular visit by email, Whatsapp, phone call.

FAQ
QI: How long about delivery time for Concrete Lifting anchors?
A1: The delivery time will be very short, normally we keep the raw materials for old customers, and sometimes we also keep stock products to make sure delivery time in any emergency cases. 
Q2: How do we guarantee the quality of our Concrete lifting anchors?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will book the vessel for goods. The specific shipping date is dependent upon international and government factors but is typically 7 T

Why Choose Us?
1.Asian reliable supplier from China, we have served numerous clients all over the world. We have been working with our customers for fifteen years. We have a comprehensive set of services, sales, and after-sales service.
2.We have all the popular design; Small order is accepted and competitive price.
3.Our team will inspect and test goods very carefully when Know the material tread and know the market
4. All inquiries responded within 12 hours Close to the port, providing great advantages to trade
5.What are your payment terms? For other payment terms, we can negotiate about it depend on specific order details.
6. After the product enters the freight forwarding warehouse:
Our salesman confirms that the bill of lading is correct and informs the customer of the sailing date and arrival date.
Provide customs clearance information such as invoices, packing data, BL, Form-e and CO, pictures of products entering the warehouse, etc.
Or provides a one-stop DDP service for customs clearance.